When the setting window of METAZA Driver for METAZAStudio is displayed, the values for any settings made
there are temporary, and are not saved.
P. 83, "Keeping the settings of METAZA Driver"
5-4 Adjustment of the Origin-point Location
Click the [Material] tab.
In the width and length fields
for [Offset], enter the displace-
ment values you noted in step
.
In the case of the figure in step
-0.5 in [Width] and 0.5 in [Length].
Click [OK].
The window closes.
Chapter 5 Maintenance and Adjustment
, enter
97