Main Functions - Panasonic WJ-GXE500E Installation Manual

Note:
• It is necessary to configure the network settings of the PC and its network environment to
monitor images and audio from the unit on the PC. It is also necessary to install a web browser
on the PC.

Main functions

Motion adaptive interlace/progressive conversion function
It is possible to generate digital images with smooth movements by detecting moving areas to pro-
cess analog images.
Coaxial communication with cameras
This unit can control the pan/tilt heads and lenses of optional combination cameras with the coaxial
communication.
Cable compensation
This unit compensates the deterioration of analog images caused by long-distance transmission to
maintain the image clearness.
Power over Ethernet function
When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply con-
necting a LAN cable. (IEEE802.3afcompliant)
Interactive communication with audio is available (Only for images from Ch1)
By using the audio output connector and the microphone input connector, receiving audio from the
unit on a PC and transmitting audio from the PC to the unit is available.
SDHC/SD memory card slot equipped
The images at alarm occurrence or network failure can be saved on an SDHC/SD memory card
(option). Images can be directly saved on an SDHC/SD memory card. The images on an SDHC/SD
memory card can be reproduced on a web browser or downloaded via a web browser.
(Recommended SDHC/SD memory card ☞ page 30)
RS-485 command table
This unit can support RS-485 commands in various formats by uploading a command table to the
unit.
6