Table of Contents
Advertisement
H
H
EADLIGHT ADJUSTMENT
EADLIGHT ADJUSTMENT
Proceed as follows:
1. Position the vehicle in riding conditions, and with the tyres
inflated at the prescribed pressure, on a horizontal surface
10m away from a half-lit white screen, ensuring the vertical
axis of the vehicle is perpendicular to the screen;
2. Turn on the headlight and check the distance between the
ground and the horizontal line which separates the lit area
from the dark region, is no more than 9/10 and not less than
7/10 of the height of the headlight, measured from the
ground;
3. If this is not the case, adjust the headlight via screw «A»,
which may be reached by removing the front grid.
WARNING
THE PROCEDURE DESCRIBED ABOVE COMPLIES WITH THE
"EURONORM" CONCERNING THE MAX. AND MIN. HEIG-
HT OF THE LIGHT BEAM OF A ROAD VEHICLE. PLEASE
CHECK WITH THE LOCAL AUTHORITIES FOR WHAT REQUI-
REMENTS MUST BE FULFILLED IN EVERY SINGLE COUNTRY
WHERE THE VEHICLE IS TO BE USED.
SAS
SAS
FILTERS INSPECTION AND CLEANING
FILTERS INSPECTION AND CLEANING
ENGINE 250
- Remove the two screws shown in the picture.
61
Advertisement
Table of Contents
