Turn Signal Lights Malfunction; Heavy Steering - Derbi GP1 125-250 c.c. Workshop Manual

TURN SIGNAL LIGHTS MALFUNCTION

F
LASHING LIGHTS NOT WORKING
POSSIBLE CAUSE
Electronic ignition device failure.
STEERING AND SUSPENSIONS

HEAVY STEERING

H
ARDENING STEERING
POSSIBLE CAUSE
Excessive steering wheel clearance
E
XCESSIVE STEERING PLAY
POSSIBLE CAUSE
Steering wheel difficult to operate
243
WORK
With the key switch set to «ON» connect the jumpers 1
(Blue-Black) and 5 (Red/Blue) on the control unit con-
nector. If lights do not turn on and remain solid when
the flashing light control is actuated, replace the con-
trol unit, otherwise check the wiring and the switch.
WORK
Check the tightening of the top and bottom ring nut.
If the anomaly continues during the steering wheel
rotation even after the adjustment, check the bearing
ball rolling seats. If they are recessed or if the balls are
squashed, replace.
WORK
Check the tightening of the top and bottom ring nut.
If the anomaly continues during the steering wheel
rotation even after the adjustment, check the bearing
ball rolling seats. If they are recessed or if the balls are
squashed, replace.