Changing a wiper blade
CHANGING A WINDSCREEN
WIPER BLADE
Placing the wiper blades
in the special position
-
Less than a minute after switching
off the ignition, operate the wipers
stalk to position the wiper blades
along the windscreen uprights
(special position).
Changing a windscreen wiper blade
-
Lift the wiper arm, then disconnect
the windscreen-wash pipe.
-
Unclip the blade and remove it.
-
Fit the new blade.
-
Reconnect the windscreen-wash
pipe and push back the wiper arm.
To return the windscreen wipers
to their normal position, switch on
the ignition and operate the wipers
stalk.
Changing the rear wiper blade
-
Lift the wiper arm, then unclip the
blade and remove it.
-
Fit the new blade and push back
the wiper arm.