Changing A Wiper Blade; Fitting Roof Bars - CITROEN C1 2016 Handbook

Table of Contents

Advertisement

Practical information
Changing a wiper 
blade
Removing the front wiper blade
F  Raise the wiper arm.
F  Remove the wiper blade, sliding it towards 
the outside.
Fitting the front wiper blade
F  Put the corresponding new wiper blade in 
place and fix it.
F  Fold down the wiper arm carefully.
To conserve the effectiveness of
the flat-blade type wiper blades, we 
recommend that they are:
handled with care,
cleaned regularly with soapy water,
not used to hold a cardboard sheet 
against the windscreen,
replaced at the first signs of wear.
144
Fitting roof bars
When fitting transverse roof bars, use the 
accessories recommended by CITROËN and 
follow the manufacturer's fitting instructions.
For more information, contact a CITROËN 
dealer or a qualified workshop.
Maximum weight authorised on the bars,
for a loading height not exceeding 40 cm
(except bicycle carrier): 40 kg.
If the height exceeds 40 cm, adapt the
speed of the vehicle to the profile of the
road to avoid damaging the roof bars.
Please refer to national legislation in 
order to comply with the regulations 
concerning the transportation of objects 
which are longer than the vehicle.

Advertisement

Table of Contents
loading

Table of Contents