Table of Contents
Advertisement
04 HANDS-FREE KIT
MATCHING A TELEPHONE
DISPLAY C
For safety reasons and because they require prolonged attention on
the part of the driver, the operations for matching of the Bluetooth
mobile telephone with the audio equipment hands-free kit must be
carried out with the vehicle stationary and the ignition on.
Activate the telephone's Bluetooth function and
1 1
carry out a search of the Bluetooth accessories
present for the telephone.
Select the accessory which corresponds to the
2 2
name of the vehicle, a superimposed confi guration
display appears on the multifunction display.
Enter the vehicle's authentication code (=1234).
3 3
Depending on the telephone, you may be asked
to enter this code before the superimposed
confi guration display appears.
Select the YES tab on the display using
4 4
the buttons then confi rm by pressing OK.
9.74
The services offered by the hands-free kit depend on the network, the SIM card and the
compatibility of the Bluetooth equipment used.
Consult your telephone's manual and your operator to fi nd out which services are
available to you. A list of mobile telephones which offer the best range of services is
available from the network. Consult a CITROËN dealer.
Refer to the next page: "Correct use of the hands-free kit telephone".
1 1
2 2
1 1
YES
RECEIVING A CALL
An incoming call is announced by a ring and a superimposed display
on the multifunction display.
Select the YES tab on the display
using the buttons and confi rm by
pressing OK.
Press the end of the steering wheel stalk to accept
the call.
MAKING A CALL
Press the end of the steering wheel stalk for more
than two seconds to access your directory.
To dial a number, use the keypad on your
telephone.
YES
Advertisement
Table of Contents
