-
Place the jack in contact with the
locating point provided, the one
which is closest to the wheel to
be changed. Ensure that the base
of the jack is in contact with the
ground, and straight above.
-
Extend the jack to lift the wheel
clear of the ground.
-
Resume and complete the
unscrewing of the wheel bolts.
-
Remove the bolts and remove the
wheel.
Do not extend the jack until you
have started unscrewing the bolts
on the wheel to be changed and
have placed the chock under the wheel
diagonally opposite.
Changing a wheel
5. FITTING THE SPARE WHEEL
-
Position the wheel on the hub and
start tightening the bolts by hand.
-
Initially tighten the bolts using the
wheelbrace.
7