Table of Contents
Advertisement
2 - Driver's temperature
adjustment
3 - Passenger's temperature
adjustment
The required value is displayed
(from 14 to 28: comfort value = 21).
The maximum difference between the
value displayed for the driver and for the
passenger may not be greater than 5.
If you use these manual adjustments,
the AUTO symbol switches off.
Press the corresponding "+" and "-"
buttons to adjust.
To make the driver and passenger
setting the same:
-
air conditioning with "MONO"
version, press the MONO button.
-
air conditioning with "REAR"
version, press the + button for more
than two seconds.
On entering the vehicle, the
interior temperature may be
considerably lower (or higher)
than is comfortable. It is not necessary
to change the value displayed in order
to quickly obtain the desired level of
comfort. The system will operate at
maximum performance to reach the
comfort value set.
4 - Adjustment of the air
distribution
Pressing the corresponding
button(s) 4 allows you to
position the air fl ow towards:
- the windscreen,
- the side vents and the
central vents,
- the side vents, the central
vents and the footwells,
- the windscreen and the
footwells,
- the footwells.
The indicator light corresponding to the
position selected 4 comes on.
5 - Adjustment
of the rear ventilation
("REAR" version)
To permit adjustment of
the ventilation to the rear
passengers, press the REAR
button.
The rear ventilation symbol is displayed.
The row 2 side vents air
fl ow adjustment controls
are operational and can
be adjusted.
To deactivate the rear
ventilation controls,
press the REAR button
again.
The rear ventilation
symbol switches off.
Take care not to obstruct
the side vents and the
air outlets on the fl oor.
MONO Version
Press this button once to
obtain an even temperature
throughout the passenger
compartment. The reference
value is selected by the driver.
Ventilation
3
Advertisement
Table of Contents
