Table of Contents
Advertisement
4-6-8 Turn GPS ENABLE on/off
SETTING
COG/SOG
GPS ALERT
>GPS ENABLED
1.
In the radio setup MENU, select GPS/DATA, then SETTING.
2.
Move the cursor to GPS ENABLED and press ENTER.
3.
Select ON/OFF as desired, in this example, ON has been selected, so the GPS
ENABLED is turned ON.
4-6-9 Set Magnetic Variation (MAG VAR)
SETTING
GPS ALERT
GPS ENABLED
>MAG VAR
1.
In the radio setup MENU, select GPS/DATA, then SETTING.
2.
Select MAG VAR.
Note: AUTO MAG VAR is default - set 00.0 for TRUE
Use CH / to adjust the MAGNETIC difference between true and variation, then press
ENTER to confirm selection.
MAG VARIATION
XX.X °W (or E)
Note: W is the default and tenths of a degree is required.
SAVE
>YES
NO
36
GPS ENABLED
>ON
OFF
MAG VAR
00.0 °W AUTO
Simrad - HH33 Installation and Operation Instructions
Advertisement
Table of Contents
