Table of Contents
Advertisement
1.
Select RADIO SETUP then NMEA OUT.
2.
Select ON/OFF then press ENTER to confirm your desired choice.
4-8 DSC Setup (US only)
The submenu is used to set behavior of the function. Items are available for selection.
Hold down CALL/MENU then select DSC SETUP, press ENTER to enter DSC SETUP sub-
menu in which there are 5:
USER MMSI
INDIV REPLY
LL REPLY
4-8-1 Enter or Check Your USER MMSI (USER MMSI)
Note: You must enter your user MMSI before you can access the DSC functions.
When you have entered your MMSI correctly, you can display it any time.
>USER MMSI
GROUP SETUP
INDIV REPLY
USER MMSI
876543210
>STORE
CANCEL
1.
The cursor is at DSC SETUP and press ENTER.
2.
The cursor is at USER MMSI. Press ENTER.
If you have already entered your MMSI, it is shown on the screen.
If this is the first time that you are entering your MMSI, a dashed line appears with
the cursor under the first position. You need to enter your MMSI along the dashed
line, one number at a time.
3.
Press CH
/ to select the first number of your MMSI. Press ENTER to confirm the
number and move to the next position. If you make an error, select the < character
then press ENTER to backup.
4.
When you have entered the last number, push ENTER to advance to the next screen.
The cursor is at STORE.
40
GROUP SETUP
DSC SELECT
INPUT USER
MMSI
--------------------
Simrad - HH33 Installation and Operation Instructions
USER MMSI
876543210
>STORE
CANCEL
USER MMSI
INPUT AGAIN
----------------------
Advertisement
Table of Contents
