Table of Contents
Advertisement
1.
Press CALL/MENU to show the DSC CALL menu.
2.
The cursor is at LAST CALL, push ENTER.
The contact details of the most recent incoming call are displayed.
3.
Select the working channel and press ENTER.
Note: Duplex channels cannot usually be called and are automatically eliminated from
the suggested call list. If the call is to a coast station, the channel is selected
automatically.
4.
The call details are shown. Press ENTER to send the call. The Tx icon is displayed on
the screen while the call is being sent.
5.
If the call is acknowledged, press PTT to talk.
6.
If there is no reply (UNABLE TO ACKNOWLEDGE), a message asks if you want to retry
(SEND AGAIN?).
7.
Select YES and then press ENTER to retry the call. This cycle repeats twice. If the call
still cannot be placed, the radio returns to normal operation.
5-8 Request the LL position of a buddy (LL Request)
DSC CALL
CALL LOG
DIST LOG
> LL REQUEST
SAM
LL REQUEST
WAITING ACK
1.
Press CALL/MENU to enter DSC MENU, then select LL REQUEST.
2.
Select the buddy whose LL position you want to request, then press ENT to send the
request.
3.
The working channel name is displayed while the radio waits for an
acknowledgement from your buddy. If there is no reply after 30 seconds, the radio
asks if you want to retry.
5-9 Track Your Buddy Request (TRACK BUDDY)
Use the TRACK LIST option to select a buddy (or buddies) whose position you want to
track. Specify the time interval through the INTERVAL option, to start the track alterna-
tively. If the buddy name and time interval are already set to your preference, just start
tracking.
54
LL REQUEST
> SAM
VHF7200
BUDDY #3
Simrad - HH33 Installation and Operation Instructions
SAM
LL REQUEST
>SEND?
SAM
LL REQUEST
CALLING . . .
Advertisement
Table of Contents
