Mounting Battery Charger To Flat Surface; Mounting Battery Charger And Bracket Onto Wall - Simrad HH33E Manual

This radio supports NMEA0183 for outputting the GPS signal. You can use the GPS con-
nector to connect the radio and some GPS navigation receiver, such as chart plotter.
1. Insert the GPS connector cord into the NMEA socket of the cradle charger.
2. Connect the chart plotter to the VHF using the following wiring code:

3-1-4 Mounting Battery Charger to flat surface

You can mount the battery charger straight onto solid surface. Make sure that the surface
can be penetrated and is strong enough to hold permanantly in place.

3-1-5 Mounting Battery Charger and bracket onto wall

You can also mount the battery charger onto wall by using the provided bracket and
screws.
1. Mount the bracket as indicated in the diagram.
2. Attach the battery charger to the bracket using the screws provided.
14
Wire Color
Red
Black
Simrad - HH33 Installation and Operation Instructions
Function
NMEA OUT(+)
NMEA OUT(-)