Procedure Specific To Stylus Photo 1390; Upper Housing - Epson Stylus Photo 1390 Service Manual

EPSON Stylus Photo 1390/1400/1410

4.3 Procedure Specific to Stylus Photo 1390

This section describes disassembly procedures of the Upper Housing and the Paper EJ
Frame Assy of Stylus Photo 1390.
4.3.1

Upper Housing

1. Open the Printer Cover and the Paper Support.
2. Remove the two C.B.S. 3x6 screws, and open the Front Cover.
Printer Cover
2) C.B.S. 3x6
(6±1 kgf.cm)
Figure 4-146. Opening the Front Cover
DISASSEMBLY AND ASSEMBLY
Paper
Support
Front Cover
Procedure Specific to Stylus Photo 1390
3. Remove the Side Housing. See Section 4.2.1.2 on page 78.
4. Remove the four C.B.P. 3x10 screws, three C.B.S. 3x6 screws, and two C.B.P.
3x10 screws that secure the Upper Housing.
8
1
Guide Pin
Upper
Housing
6
2
Tab
Figure 4-147. Screws that Secure the Upper Housing
Revision B
7
Guide Pin
1) C.B.P. 3x10
(6±1 kgf.cm)
2) C.B.S. 3x6
(6±1 kgf.cm)
15) C.B.P. 3x10
(6±1 kgf.cm)
Front Cover
5
4
Tab
3
9
128