PCIX Channel A Frequency Jumper: J27
The jumper is used to set the channel A of 64-bit PCI bus (PCIX) to run
at PCI 66 Mode or PCI-X Mode. Channel A includes SCSI interface and 64-
bit PCIX1 slot.
J27
PCI 66 Mode
PCI-X Mode
PCIX Channel B Frequency Jumper: J28
The jumper is used to set the channel B of 64-bit PCI bus (PCIX) to run
at PCI 66 Mode or PCI-X Mode. Channel B includes Giga-bit LAN and 64-bit
PCIX3 slot.
PCI 66 Mode
PCI-X Mode
J28
Hardware Setup
2-25