MSI MS-9125 User Manual page 58

MS-9125 SSI Mainboard
Quick Power On Self Test
The option speeds up Power On Self Test (POST) after you power on the
computer. When setting the item to Enabled, BIOS will shorten or skip some
check items during POST. Settings: Enabled, Disabled.
O/B SCSI & Slot Boot Order
This setting determines the boot order of onboard SCSI & slots. Setting options:
[SCSI, Slot], [Slot, SCSI].
First/Second/Third Boot Device
The items allow you to set the sequence of boot devices where BIOS attempts
to load the disk operating system. The settings are:
Floppy
LS120
Hard Disk
CDROM
ZIP100
LAN
Disabled
MSI Reminds You...
Available settings for "First/Second/Third Boot Device" vary de-
pending on the bootable devices you have installed. For example, if
you did not install a floppy drive, the setting "Floppy" does not
show up.
Boot Other Device
Setting the option to Enabled allows the system to try to boot from other
devices if the system fails to boot from the 1st/2nd/3rd boot device.
Swap Floppy Drive
Setting to Enabled will swap floppy drives A: and B:.
Boot Up Floppy Seek
This setting causes the BIOS to search for floppy disk drives at boot time.
When enabled, the BIOS will activate the floppy disk drives during the boot
process: the drive activity light will come on and the head will move back and
forth once. First A: will be done and then B: if it exists. Setting options:
Disabled, Enabled.
3-12
The system will boot from floppy drive.
The system will boot from LS-120 drive.
The system will boot from the HDD.
The system will boot from the CD-ROM.
The system will boot from ATAPI ZIP drive.
The system will boot from the onboard
10/100 Network drive.
Disable this sequence.