Kawai Concert Performer CP3 Owner's Manual page 64

Page
64
To create your own Registration:
Step 1
Set up the instrument's panel and functions in the way that you'd like to save them.
Step 2
Press the REGISTRATION GROUPS button.
Step 2
Touch the SAVE button, then touch one of the five Registration Groups listed in which to save your setup.
Touch the PAGE buttons to view the 10 Registration Groups in sets of five.
5
Step 3
Press one of the 8 REGISTRATION buttons to specify which location you'd like to save your Registration to.
The CP remembers how the front panel was setup before you chose a Registration so that after exiting the Registration,
the prior settings will be restored.
It is not necessary to always begin with the REGISTRATION GROUP button when selecting a Registration. If the group
you want to use is already selected, pressing one of the REGISTRATION buttons will activate a setup from that group.
The CP will remember the Registration Group last chosen as long as the power remains on.
You cannot use the 1-2 Play function and Registrations at the same time. Choosing one always cancels the other.
The following settings can be stored in a Registration:
Sounds (Right1, Right2, Left), Split Point, Style and Variation, Fill-in mode, Tempo, Accompaniment settings, Mixer
settings, Chorus settings, Effect settings, Harmony settings, Voicing, Detune, Resonance, Left Pedal functions.
You can save your Registrations to a USB memory device and load them into the CP later. (See page 119)
PAGE : Display Registration Groups listed on pther pages.
Touch the name to select the Registration Group.
Press the specific REGISTRATION
button where you'd like to save to.