Kawai Concert Performer CP3 Owner's Manual page 129

REPEAT : Repeat the current audio file.
NAME : The name of the current audio file.
VOLUME : Adjust the volume using the Dial.
VOCAL ON : Enable the vocal remove function
(see below)
MAIN SCREEN : Return to the MAIN SCREEN..
Playback of the MP3/WAV audio file can be controlled by touching the transport buttons at the bottom of the
screen:
Stop song
Step 6
Touch the REPEAT AB button once to set the start of the section to be repeated.
Touch the REPEAT AB button again to set the end of the section to be repeated.
The AB section will repeat continuously until the REPEAT AB button is touched for a third time, thus deactivating
the function and resuming normal playback.
Step 7
Touch the MAIN SCREEN button to return to the MAIN SCREEN.
Pressing the USB panel button again will return you directly to the AUDIO PLAY screen.
About the Vocal On/Remove function
When playing MP3/WAV audio files, the CP's Vocal Remove function attempts to remove the vocal track from
commercially produced music.
VOCAL ON:
VOCAL REMOVE:
MENU : Return to the USB menu.
TRANSPORT BUTTONS : Control playback of audio files.
Play song
Previous song
The audio file will playback as recorded.
Vocal or melody sounds that are heard from the center when playing back an audio
file will be removed so you can sing or play the melody yourself.
Please note that for some audio files, it may not be possible to completely eliminate
the melody.
PLAY MODE : Adjust the type of play mode
for the audio files (All / Program / Random /
Single).
SONG LIST : Return to the list of audio files.
REPEAT AB : Repeat one section of a song
continuously.
Skip backward Next song
Skip forward
Page
129
9