Kawai Concert Performer CP3 Owner's Manual page 40

Page
40
Step 2
Touch the screen to select a function to edit. Use the Dial to change the values.
Step 3
If necessary, you can go to the Mixer and Track Settings screens by touching the appropriate buttons.
Step 4
Start recording by pressing the PLAY/STOP button while the REC button LED is blinking. There is an
automatic two bar count in before the CP begins recording. If you are recording on the Style track you must
press the START/STOP button instead of the PLAY/STOP button.
When recording a Style there is no two bar count in, recording begins immediately.
You can cancel recording at anytime by pressing the REC button again or by touching the MENU button to
return to the Advanced Recorder menu.
REC TRACK : Selects the track on which you
want to record. There are 16 Instrument
tracks, 1 Tempo track, and 1 Style track.
REC SOUND: Selects the sound or Style that
you want to record with.
4
BAR : Shows the current bar and beat
number.
START BAR : Selects the starting bar for the
Loop feature. This function is a available only
when Loop is turned ON.
To play back the recorded song:
Step 1
Press the RESET button in the RECORDER section of the front panel to return to the first bar of the
song.
Step 2
Press the PLAY/STOP button to play back the song.
Step 3
Press the PLAY/STOP button again to stop at any time.
Step 4
Pressing the PLAY/STOP button again resumes the playback from the bar where you stopped.
Step 5
Press the RWD or FWD buttons to rewind or fast-forward through the recording.
When you select a Style to record the default tempo for that Style is ignored. The Style will use the current tempo setting
for the song instead. You can set the desired tempo on the Real-time record screen before recording or change the tempo
after you have recorded in Song Edit or on the tempo track in Event Edit.
When you are recording on the Style track only the Style will be recorded. The style track will record any chords (to the
chord track) you play but the actual notes you are playing will not be recorded.
When the recording is done, the Mixer screen will automatically be displayed.
MENU : Cancels the real-time recording setup and returns
you to the Advanced Recorder menu.
MIXER : Takes you to the Mixer menu.
TRACK SETTINGS : Shows the Track Settings menu.
LOOP : Turns the Loop feature on/off.
B/M : Changes the time signature.
TEMPO : Changes the tempo.
REC MODE : Selects the recording mode.
REPLACE erases the previous data and
records the new data in its place. OVERDUB
mixes the new data with the previous data
so that both are heard together. Repeatedly
touching REC MODE switches between the
REPLACE and OVERDUB.