Advertisement
Installation Instructions
1. Remove the plastic dome cover.
2. Lossen the two screws of the supporting bracket to remove the
camera body.
3. Using four screws to fix the camera base on the ceiling.
4. Put the camera body back to the supporting bracket, then tighten the
two screws to fix the camera.
5. Connect the BNC connector of the camera to a color monitor, or
other video device through a 75 ohm type coaxial cable with BNC
female connector at cable extension.
6. Connect the DC12V/AC24V regulated power source of the camera.
7. Connect the audio output connector of the camera(model High
Resolution Dome A) to the audio in connector of the monitor.
NOTE:
Be very careful not to scratch or damage the lens while making any kind of
setting.
7
Advertisement
