8.3.1.4 Mon Display - JRC JMA-5212-4/6 User Manual

8.3.1.4 MON Display

The performance monitor status is shown.
* A performance monitor unit is required.
Transmitter System
Attenuation Value
Receiver System
MON Pattern Range
Attenuation Value
Procedure 1
2
Exit 1
Check attenuation in the transmitter system
Check attenuation in the receiver system
Press [4] key while Test Menu is open.
MON Display menu opens.
Turn [VRM] control to slide the VRM to
the end of the performance monitor
pattern.
Attenuation in the receiver system is displayed in
Attenuation Value of Receiver System.
Press [RADAR MENU] key.
The menu will be closed.
8 13