Installing A Memory Module - Toshiba Tecra R950 Series User Manual

Use a point size 1 Phillips screwdriver for R950/R940 and point size 0
Phillips screwdriver for R930 to remove and fasten the screws - the use of
an incorrect screwdriver can damage the screw heads.

Installing a memory module

To install a memory module, follow the steps as detailed below:
1.
2.
3.
4.
5.
User's Manual
Do not try to install or remove a memory module under the following
conditions.
a.The computer is turned on.
b.The computer was shut down in either Sleep or Hibernation Mode.
c.Wake-up on LAN is enabled.
d.The wireless communication function is on.
e.Sleep and Charge function is enabled.
Be careful not to let screws or other foreign matter fall into the
computer. It could cause malfunction or electric shock.
Additional memory module is a precision electronic component that
may be fatally damaged by static electricity. Since the human body
can carry static electricity, it is important that you discharge yourself
before touching or installing any additional memory modules. To
discharge your body's static electricity, simply touch any metal close to
you with bare hands.
Click Power in the Settings charm, and then click Shut down while
holding down the SHIFT key - ensure that the Power indicator is off.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
Close the display panel.
Turn the computer upside down and remove the battery pack (refer to
Replacing the battery pack
Loosen the screws securing the memory module cover in place -
please note that the screws are attached to the cover in order to
prevent them from being lost.
section, if required).
4-37