Memory Media Card - Toshiba Tecra R950 Series User Manual

Problem
You cannot access a
CD/DVD/Blu-ray
Disc™ in the drive

Memory Media Card

For further information, please refer to
Problem
Memory media card
error occurs
You cannot write to
a memory media
card
You cannot read a
file
Smart Card
For further information, please refer to
Problem
Smart Card error
occurs
User's Manual
Procedure
Make sure the drive's disc tray is securely closed.
Press gently until it clicks into place.
Open the disc tray and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the disc tray could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the disc is dirty. If it is, wipe it with
a clean cloth dipped in water or a neutral cleaner.
Operating
Procedure
Remove the memory media card from the
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
Remove the memory media card from the
computer and check to ensure that it is not write
protected.
Check to ensure the required file is actually on the
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Operating
Procedure
Remove the Smart Card from the computer, make
sure to confirm that the card oriented correctly and
reinsert it in order to ensure it is firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your Smart Card for
further information.
Basics.
Basics.
6-9