Bose Acoustimass 6 series II Owner's Manual page 16

Cleaning your speakers
Wipe the cube speakers using a damp cloth Do not use solvents or chemicals Do not allow
liquids to spill on or objects to drop into the Acoustimass® module or the speaker grilles You
may vacuum the grilles carefully, the drivers are directly behind the grille cloth No other
maintenance is needed
Troubleshooting
If you have a problem with your Acoustimass 6 speaker system, turn off your sound source
and try the solutions below If you still have a problem, contact your Bose® dealer to arrange
for service To contact Bose directly, refer to the inside back cover of this guide
Problem
System does not function
at all
No sound
No surround sound
16
What
to do
• Make sure the power cord of the receiver is plugged into an operating AC wall outlet and
the receiver is turned on
• Be sure to select a source at the receiver (video, CD, tuner)
• Check the cube speaker and Acoustimass module connections Turn on the receiver
• Check connections of external components to the receiver
• Increase the volume
• Disconnect any headphones
• If your surround sound receiver is Pro-Logic, be sure your receiver is connected to a stereo
sound source (TV, VCR, laserdisc or DSS player) by an RCA stereo cable If the receiver is
connected directly to a stereo television, make sure that all other program sources (VCR,
laserdisc or DSS player) are connected to the TV using RCA stereo cables as well
• If your surround sound receiver is Dolby Digital (AC-3), be sure the sound source (DSS,
laserdisc or DVD player) is connected directly to your receiver as shown in the owner's
guide
• On your T\I, turn off enhanced surround sound, if available Set your TV for stereo only