Bose Acoustimass 6 series II Owner's Manual page 15

Using your Dolby Digital (AC.3J receiver
Your Acoustimass® 6 speakers are compatible with the output from Dolby Digital (AC-3)
receivers Take special care to set the channel output according to the specifications listed in
the chart below The Acoustimass speaker system is a full-range system and must be set as
LARGE speakers on the Dolby Digital screen menu An exception is the center speaker, which
must be set as SMALL Turn the subwoofer OFF and turn the LFE (low-frequency effects) ON
Receiver channel output
Left and Right Front
Center
Left and Right Surround
Subwoofer
LFE (low-frequency effects)
Proper setting
LARGE
SMALL
LARGE
OFF
ON
Follow the receiver owner's guide instructions for using the receiver test tone to verify your
connections and to adjust the volume levels of the speakers
15