Bose Acoustimass 6 series II Owner's Manual page 13

Attaching the module end cover
The module end cover is designed to hide the cabling and extend the smooth, clean lines of
the Acoustimass® module However, because the cover has a beveled surface, you cannot
stand the module on that end with the cover in place
If you plan to use the cover, attach it to the cable end of the module after all connections
have been checked (Figure 10) Gently push the end cover into the grommets on the Acousti-
mass module
Your set up is complete Enjoy your Acoustimass 6 speaker system
Figure 10
The module end cover fits over
the cables
13