Bose Acoustimass 6 series II Owner's Manual page 10

Separate the wire pairs as you layout the cable lengths You may want to keep unextended
lengths of cable joined, making them easier to hide Refer to Figure 8 on for an overview of
the completed connections
• Use the 20 foot (6 m) front speakers cable with three pairs of wires to connect the
Acoustimass module to the center, left front, and right front cube speakers
• Use the 50 foot (15 m) surround speakers cable with two pairs of wires to connect the
Acoustimass module to the left and right surround cube speakers
• Use the 20 foot (6 m) system input cable with five pairs of wires to connect the
Acoustimass module to the outputs on the receiver Separate these wires just enough to
reach the connectors
J
Note: If you have already installed cable behind walls or under floors, or believe you need to
splice the supplied cables for any other reason, inquire about the add-on connectors and
extension cable available from Bose@ Customer Service Refer to page
17
for details on these
accessories Bose Customer Service telephone numbers are listed on the inside back cover
FigureS
System Connections
+
10
Surround speakers cable
Front speakers
cable
System input
cable