Connecting A Pc; Selecting The Channel Position For The Pc - Grundig AMIRA 15 Set Up And Operation Manual

PC MENU
CLOCK
PHASE
H. POSITION
V. POSITION
AUTO CONFIG.
SELECT
OK AND EDIT
22
PC MONITOR MODE
Note:
The Amira 20 is not suitable for use with a PC.

Connecting a PC

Connect the »VGA« socket on the television set and the appro-
1
priate socket of the PC using a VGA cable.

Selecting the channel position for the PC

Select the PC channel position with »-/--«.
1
PC settings
These settings are only possible when signals are received from
a PC.
Press »
1
– The »INFO« menu appears.
Select »SEARCH/TUNE« with »P+« or »P-« and press »OK«
2
to confirm.
– The PC menu appears.
Select the function or setting you want with
3
press » « or » « to execute it.
– Options:
EXIT
BACK
Press »
4
i
« to open the »INFO« menu.
»CLOCK« Set the cycle frequency
»PHASE« Remove horizontal flicker, blurring and
horizontal lines
»H. POSITION« Adjust the picture position horizontally
»V. POSITION« Adjust the picture position vertically
»AUTO CONFIG« For automatic PC configuration
i
« to exit the PC menu.
__________________________
AV 1
AV 2
ANT IN
AUDIO OUT AV 3
L R L R Video S-VHS DC 15V
PC INPUT
»P +« or »P- « and