Picture Settings; Audio Settings - Grundig AMIRA 15 Set Up And Operation Manual

PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
SMART CONTROL
SELECT
AND EDIT
OK
SOUND
VOLUME
BALANCE
SOUND TYPE MONO
SOUND MODE NORMAL
EQUALIZER
SELECT
AND EDIT
OK
12
SETTINGS

Picture settings

Press »
1
– The »INFO« menu appears.
2 Select »PICTURE« with »P+« or »P-« and confirm with »OK«.
– The »PICTURE« menu appears.
Select
3
USER
»SHARPNESS« with »P+« or »P-« and adjust them with » «
EXIT
or » «.
BACK
Notes:
After a short while the »PICTURE« menu reappears.
The settings are saved as the »USER« picture default setting.
Press »
4

Audio settings

1 Press »
– The »INFO« menu appears.
2 Select »SOUND« with »P+« or »P-« and confirm with »OK«.
– The »SOUND« menu appears.
Note:
Further operation is explained in the following sections.
Volume
EXIT
The standard volume is set here. This is the volume of the device
BACK
after switching on.
Select »VOLUME« with »P+« or »P-« and adjust the setting
1
with » « or » «.
Balance
Select »BALANCE« with »P+« or »P-« and adjust the setting
1
with » « or » «.
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II «) and the
dubbed version on sound channel A (display: »DUAL I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »STEREO«).
You can switch the sound to »MONO« if the stereo reception
quality is poor.
Select »SOUND« with »P+« or »P-« and adjust the setting with
1
» « or » «.
______________________________________________
i
« to open the »INFO« menu.
»BRIGHTNESS«, »CONTRAST«,
i
« to finish the settings.
i
« to open the »INFO« menu.
»COLOUR« or