Settings; Setting Television Channels Automatically; Changing Stored Channels - Grundig AMIRA 15 Set Up And Operation Manual

SPRACHE
DEUTSCH MAGYAR
DANSK POLSKI
ESPAÑOL TÜRKÇE
EΛΛHNIKA
FRANÇAIS
ENGLISH
ITALIANO SUOMI
NORSK âESKY
NEDERLANDS ROMÂNESTE
PORTUGUÊS
SLOVENSKO HRVATSKI
SVENSKA
AUSWÄHLEN
UND BESTÄTIGEN
OK
COUNTRY SELECTION
BELGIUM NETHERLANDS
CZECH REP. NORWAY
DENMARK POLAND
FINLAND PORTUGAL
FRANCE SPAIN
GERMANY SWEDEN
GREECE SWITZERLAND
HUNGARY TURKEY
IRELAND UK
ITALY –––
SELECT
OK AND CONFIRM
INFO
SOUND
PICTURE
SETUP
FEATURES
SELECT
OK AND OPEN
10

SETTINGS

Setting television channels automatically

The television set is equipped with an automatic channel search
system.
You start the search and can then sort the television channels into
your order of preference.
99 preset positions are provided, to which you can assign television
channels from the antenna or from the cable connection.
Switch on the television with »
1
press »P+« on the remote control.
– The »SPRACHE« (LANGUAGE) menu appears when the tele-
Hint:
If the »SPRACHE« (LANGUAGE) menu does not appear on the
screen,
then set it in accordance with the chapter on resetting all tele-
vision channels on page 25.
ENDE
2 Select language with »P+«, »P-«, » « or » « and press
ZURÜCK
»OK« to confirm.
– The »COUNTRY SELECTION« menu appears.
3 Press »P+«, »P-«, » « or » « to select the country and
»OK« to confirm.
– A warning message appears.
Press »OK« to start the search.
4
– The search begins. It may last a few minutes, depending on
– After the search the television switches to channel position 1
EXIT
BACK

Changing stored channels

You can delete channels that have been stored more than once
during the automatic search. You can also store channels in a diffe-
rent preset position, change or enter the name of a channel as well
as skip channels.
Selecting the station list
Press »
1
– The »INFO« menu appears.
2 Select »SETUP« with »P+« or »P-« and confirm with »OK«.
– The »SETUP« menu appears.
Select »PROGRAM TABLE« with »P+« or »P-« and confirm
3
with »OK«.
EXIT
Note:
Further operation is explained in the following sections.
______________________________________________
vision is first switched on.
the number of television stations found.
and the »PROGRAM TABLE« menu appears.
i
« to open the »INFO« menu.
IO
« on the television set, then