Setting Screen - Samsung SHT-8610 User Manual

Setting screen

To set the screen
1
Touch [ ]. Then the setting
screen appears.
4
Touch [◀/▶] to adjust the
brightness of the LCD screen.
7
Touch [Touch Correction]. Then the
touch correction for the LCD panel
starts.
2
Touch [Screen]. Then the LCD
setting screen appears.
5
Touch [Start]. Then the touch screen
does not work for 15 seconds so
you can clean the LCD panel for this
period of time.
8
Touch ' ' marks according to the

directions from the screen.
3
Touch [◀/▶] to adjust the power
saving time of the LCD screen.
※ If the power saving time has been set and no
action is taken within the specified time, the screen
is automatically turned off.
6
Clean the LCD panel for 15
seconds.
※ After 15 seconds, the touch screen starts operation.
9
To save the correction, Touch the
screen again
69