Remote-Controlling Curtains - Samsung SHT-8610 User Manual

Remote-controlling curtains

To use ARS (Automatic Response System) for remote curtain control
1
Call the desired phone number.
● When the call is not answered for a specific
time (usual case: 30 seconds, away mode: 10
seconds), it is switched to the remote control
mode.
4
If the following announcement is
heard, press [1].
"The curtain is drawn.
Enter the 1 button to draw
the curtain back."
● If curtains are opened, the message, "The
curtain is drawn back.
Enter the 1 button to draw the
." is heard. To close them, press
curtain
hang up the phone.
20
2
If the following announcement is
heard, press the 4-digit [Password].
"Enter the
password."
●
At this time, use the disengagement password.
5
To end the remote control, press any
button except
"The curtain has been drawn back.
Enter the 0 button to control the light.
Enter the 1 button to control the gas valve.
Enter the 2 button to control the curtain.
Enter the 3 button to control the boiler. "
." Or
[1]
● To end the function, hang up the phone.
● To control lights, press
● To control the gas valve, press
● To control the heater, press
● If no button is presses for 20 seconds, the phone is automatically disconnected.
● When a phone with the answering machine is installed, the remote control function
Note
may not operate depending on the automatic response interval setting.
● For setting the password, see page 70.
● All curtains are closed or opened at once.
● To use ARS for remote curtain control, the disengagement password has to be
registered and ARS has to be activated. (see page 73)
3
"Enter the 0 button to control the light.
Enter the 1 button to control the gas valve.
Enter the 2 button to control the curtain.
Enter the 3 button to control the boiler. "
6
[0], [1], [2], and [3].
● After 5 or 6 seconds, the phone is automatically
disconnected.
.
[0]
.
[1]
.
[3]
If the following announcement is
heard, press [2].
If the following announcement is
heard, hang up the phone.
"Setting is completed."