Table of Contents
Advertisement
Automatic alarm
When any alarm occurs in case of emergency, security, gas leak, fire
1
If any alarm, the corresponding
message appears and the alarm
situation is announced.
4
After repeating the procedure
(Step 1 to Step 3) two more
times, the system continues the
announcement in the house.
Alarm Stop/Return
Stopping/returning the alarm
1
Touch
[Stop]
on the screen.
(the alarm is stopped)
※ It stops announcement and other notice.
※ If any password entry is set in alarm mode, enter
the disengagement password and touch [OK] to
stop the alarm sound.
※ The password entry is optional. (see page 70)
2
After 30 seconds, the alarm situation
is reported to the security office for
30 seconds.
※ If any alarm is sounded, this function is used to stop it.
2
Touch
[Return]
on the screen.
(returned to normal)
※ This product is changed to the normal status.
The system starts detecting an alarm event.
※ After pressing [Stop/Return], if you do not
press the button for 5 minutes, it is automatically
switched to normal status.
3
The system sequentially dials the
first and second phone numbers,
that have been registered, for
reporting the situation.(for 30
seconds)
※ If no registered phone number, this step is skipped.
※ For registering the phone numbers, see page 71.
When you press the Stop/Return
●
button two times while the
Note
alarming service is in progress, all
alarm functions are disactivated.
For registering the
●
disengagement password,
Note
see page 70.
3
Hide quick links:
Advertisement
Table of Contents
