Remote-controlling gas valve
To use ARS (Automatic Response System) for remote gas valve control
1
Call the desired phone number.
● When the call is not answered for a specific
time (usual case: 30 seconds, away mode: 10
seconds), it is switched to the remote control
mode.
4
If the following announcement is
heard, press [1].
"The gas valve is open.
Press the 1 button to shut the gas
valve."
● When the gas valve is closed, the message, "The
gas valve is shut." is heard.
※ When the gas circuit breaker is not installed, the
message, "Remote control has failed." is heard.
2
If the following announcement is
heard, press the 4-digit [Password].
"Enter the
password."
●
At this time, use the disengagement password.
5
To end the remote control, press any
button except
[0], [1],
"The gas valve has been shut.
Enter the 0 button to control the light.
Enter the 1 button to control the gas valve.
Enter the 2 button to control the curtain.
Enter the 3 button to control the boiler. "
● To end the function, hang up the phone.
● To control lights, press [0].
● To control the gas valve, press [2].
● To control the heater, press [3].
※ For safety reason, the gas valve can be closed
only.
The gas valve is automatically closed upon gas leak.
●
When the gas circuit breaker detects any gas leak, the internal alarm is
●
Note
activated.
If no button is presses for 20 seconds, the phone is automatically disconnected.
●
When a phone with the answering machine is installed, the remote control function
●
may not operate depending on the automatic response interval setting.
For setting the password, see page 70.
●
To use ARS for remote gas valve control, the disengagement password has to be
●
registered and ARS has to be activated. (see page 73)
3
If the following announcement is
heard, press [1].
"Enter the 0 button to control the light.
Enter the 1 button to control the gas valve.
Enter the 2 button to control the curtain.
Enter the 3 button to control the boiler. "
6
If the following announcement is
[2], and [3].
heard, hang up the phone.
"Setting is completed."
● After 5 or 6 seconds, the phone is automatically
disconnected.