Panasonic PV-455S-K Operating Instructions Manual page 6

Timer Recording
Timer Recording
1
Press PROG* to display program screen.
2
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2 -- --:-- --:-- -- --
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SELECT : SET :
END : PROG
3
P DT START STOP CH SPD
1 13 2:00p 3:20p 02 SLP
2 -- --:-- --:-- -- --
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SET COMPLETED
CANCEL : ADD/DLT
SELECT : SET :
END : PROG
4
Press POWER off to set the timer recording. ("TIMER" lights on Multi Function Display.)
Notes
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must be set to the
Cable Box output channel and your Cable Box must be manually set to the desired channel.
The Cable Box must be left on.
• If a power interruption occurs while programming the timer, the timer program(s) may be cancelled.
If "TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION" appears on-screen,
please re-enter the timer programs.
• When recording programs via DSS receiver, DSS receiver must be left on.
• When recording programs via an antenna or cable, DSS receiver must be turned off.
1) Press .
2) Set record DATE,
press to select:
1~31= one time,
or DAILY= Monday~Friday,
or WEEKLY= same time
each week (see right).
3) Set remaining items,
press to set START/ STOP times, CH (channel) or
LINE input (p. 9 of Advanced Operations book), and
tape speed (p. 3).
Then press to select.
Press PROG to end programming.
To Enter More Programs
Press to select and press
Then repeat step 2. Or, press PROG to exit.
Important notes when using DSS receiver
Example
Today
to set an unused program.
- 6 -