Panasonic PV-455S-K Operating Instructions Manual page 10

Location of Controls / Reset All VCR Memory Functions
Front View of the VCR
POWER
Video
Input
Connector
Audio Input
Connector
(L/R)
Rear View of the VCR
AC Power Plug
While plugged into an AC outlet, the VCR consumes 0.9 W
of electrical power in off condition.
Video Input
Connector
Audio Input
Connector (L/R)
Reset All VCR Memory Functions
Returns to factory setting. Use if relocating VCR, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the VCR.
1
Note to CABLE system installer
This reminder is provided to call the CABLE system installer's attention to Article 820-40 of the NEC
in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
Cassette Compartment
Remote
Sensor
CHANNEL
/
TRACKING/ V-LOCK
Multi Function Display
(Front Display)
Video Output
Connector
•
•
Audio Output
Connector (L/R)
2
STOP/EJECT
RECORD
PLAY
1
Turn VCR Power on.
2
Press and hold both PLAY and
CHANNEL on the VCR for more than 5
seconds.
• The power shuts off.
3 Perform "Initial Setup (Ready to Play)" on
page 4.
- 10 -
FAST
FORWARD/
SEARCH
REWIND/
SEARCH
VHF/UHF Antenna
Input Terminal
VHF/UHF Antenna
Output Terminal