Special Vcr Features; Multi Function Display - Panasonic PV-455S-K Operating Instructions Manual

Special VCR Features

Auto Shut-Off Feature
The power shuts off at a preset time.
1
Press ACTION to display MENU.
2
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
3
SET UP VCR
REPEAT PLAY : OFF
AUTO SHUT-OFF : OFF
FRONT DISPLAY : ON
AUTO VCR/TV : ON
TAPE SELECT : T-120
SELECT : SET:
EXIT : ACT I ON
4
Press ACTION
to return to normal screen.
• The shut-off countdown will not
Note
function during Play or Record.
VCR/TV Selection Feature
The VCR/TV selection can be set to auto or
manual.
1
Press ACTION to display MENU.
2
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
3
SET UP VCR
REPEAT PLAY : OFF
AUTO SHUT-OFF : OFF
FRONT DISPLAY : ON
AUTO VCR/TV : ON
TAPE SELECT : T-120
SELECT : SET:
EXIT : ACT I ON
• OFF(Manual): You select "VCR" or "TV" mode
using the VCR/TV button on the
remote.
• ON(Auto): "VCR" mode is automatically set
when VCR is turned on, or in Play
mode.
4
Press ACTION
to return to normal screen.
Note
• For more on VCR/TV selection, see "Record one
station, watch another" and "Select channels on
VCR" sections (p. 5 of Basic Operations book).
VCR Lock Feature
When set to ON, all operations are prohibited.
(Except for timer record, tape eject, channel
change, and power on/off.) Useful for households
with small children.
To turn on, hold down REC
on the VCR in Stop mode with
VCR LOCK ACT I VATED
no tape inserted for 7 sec.
(Please ignore the NO
CASSETTE warning.)
To turn off, repeat above.
VCR LOCK OFF
• VCR Lock cancels in 24 hours.
Press to select
"SET UP VCR,"
and press .
Press to select
"AUTO SHUT-OFF."
Press repeatedly to
change shutoff time as
shown below.
Press to select
"SET UP VCR,"
and press .
Press to select
"AUTO VCR/TV,"
and press to set
"ON" or "OFF."
Weak Signal Display ON/OFF Feature
When set to "ON," picture is displayed regardless
of signal strength.
1
Press ACTION to display MENU.
2
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
3
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK S I GNAL D I SPLAY:OFF
SELECT : SET:
EXIT : ACT I ON
• ON : Picture is displayed even if signal
is very weak but quality may be poor.
OFF : Screen turns solid blue when signal
is weak or non-existent.
• Selecting "ON" has no effect on connected
equipment with blue back feature.
4
Press ACTION
to return to normal screen.

Multi Function Display

(Front Display) ON/OFF Feature
Multi Function Display (Front Display) can be
set to ON/OFF.
1
Press ACTION to display MENU.
2
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
3
SET UP VCR
REPEAT PLAY : OFF
AUTO SHUT-OFF : OFF
FRONT DISPLAY : ON
AUTO VCR/TV : ON
TAPE SELECT : T-120
SELECT : SET:
EXIT : ACT I ON
• ON : When set to "ON,"
Multi Function Display is displayed
in Standby (OFF) mode.
OFF : When set to "OFF,"
Multi Function Display is not
displayed in Standby (OFF) mode.
If a Timer Program is set,
Multi Function Display is displayed.
4
Press ACTION
to return to normal screen.
Multi Function Display
(Front Display)
*Important:
If a remote control button does not work
when pressed, press the VCR button on
the remote and try the button again.
- 10 -
Press to select
"SET UP CHANNEL,"
and press .
Press to select
WEAK SIGNAL
DISPLAY, and press
to set "ON" or "OFF."
Press to select
"SET UP VCR,"
and press .
Press to select
"FRONT DISPLAY,"
and press to set
"ON" or "OFF."
REC