Battery Slider - Toshiba PORTEGE S100 Maintenance Manual

4 Replacement Procedures

4.25 Battery slider

Removing the Battery slider
To remove the battery slider, follow the steps below and refer to Figure 4-36.
(Procedures to remove the battery slider of the both sides are same.)
1. Unlock the latches of the battery slider and remove the slider caps from the bottom
of the computer.
2. Remove the battery sliders.
3. Remove the springs from the battery sliders.
Spring
Battery slider
Installing the Battery slider
To install the battery slider, follow the steps below and refer to Figure 4-36.
(Procedures to install the battery slider of the both sides are same.)
1. Install the slider caps from the bottom of the computer.
2. Install the springs to the battery sliders.
3. Install the battery sliders to the base assembly.
4-58
Slider cap
Figure 4-36 Removing the battery slider
Battery slider
Slider cap
PORTEGE S100 Maintenance Manual (960-508)
4.25 Battery slider
Spring