Din-Rail Mounting - KTI Networks KFC-241 Installation Manual

Operate the product only from the type of external power source indicated on the electrical ratings
label. If you are not sure of the type of power source required, consult your service provider or local
power company.

2.3 DIN-Rail Mounting

In the product package, a DIN-rail bracket is provided and may have been pre-installed on the device unit for
mounting the converter in an industrial DIN-rail enclosure.
The steps to mount the converter onto a DIN-rail are:
1. Install the mounting bracket onto the device unit as shown below:
Model: KFC-241-L
Model: KFC-241-H
2. Attach bracket to the lower edge of the DIN rail and push the unit upward a little bit until the bracket can
clamp on the upper edge of the DIN rail.
-14-