Installation; Unpacking; Safety Cautions - KTI Networks KFC-241 Installation Manual

2. Installation

2.1 Unpacking

Check that the following components have been included:
Information CD
The Media Converter unit
DIN-rail mounting bracket (It may have been pre-installed on the device unit.)
The following are available optional accessories:
Plane Mounting Bracket: The bracket is used for mounting the converter on a plane surface.
Commercial-rated AC power adapters:
The adapters are used for supplying DC power to the converter via DC power jack interface.
Industrial-rated power supply: The power can be used for supplying DC power to the converter via
terminal block interface.
Contact sales representative for the availability.
Note: The operation temperature rating of the optional power adapters and power supply may differ from the
rating of the media converters.

2.2 Safety Cautions

To reduce the risk of bodily injury, electrical shock, fire and damage to the product, observe the following
precautions.
Do not service any product except as explained in your system documentation.
Opening or removing covers may expose you to electrical shock.
Only a trained service technician should service components inside these compartments.
If any of the following conditions occur, unplug the product from the electrical outlet and replace the part
or contact your trained service provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow the operating instructions.
Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by
shorting out interior components.
-13-