Connecting The Power Cord; Figure 16. Daisy Chain Diagram - Seagate STD124000N Product Manual

Installation

Connecting the Power Cord

Product Manual
Figure 16 illustrates these daisy-chain connections
DAT DRIVE AS THE FINAL DEVICE
DAT DRIVE WITHIN A CHAIN

Figure 16. Daisy Chain Diagram

The same type of mating connector is used for either of the daisy-chain
connections. The mating interface connector for the external drive is a single-ended
connector as described earlier in this chapter.
See Figure 15 for the location of the power cord connector.
Insert the power cord mating connector into the connector on the rear panel. Be
sure the connection is secure. Plug the other end of the power cord into an electrical
outlet power strip, a continuous power supply or a wall receptacle.
DAT DRIVE
DAT DRIVE
Chapter 3
TERMINATOR
FINAL
DEVICE
MUST HAVE
TERMINATOR
Page 31