Seagate DAT Drive Installation Manual
Figure 8
Diagram of SCSI chain with termination
SCSI Controller
(termination enabled)
Internal SCSI device
Internal SCSI device
(termination enabled)
Example 1: SCSI termination
in a system that has only
internal SCSI devices.
Connecting the power cord
Attach the power cord securely to the power connector on
the back of the drive. The location of the power connector
is shown in Figure 7 (on the previous page).
External SCSI device
(termination enabled)
External SCSI device
SCSI Controller
Internal SCSI device
Internal SCSI device
(termination enabled)
Example 2: SCSI termination
in a system that has both
internal and external SCSI devices.
13