Regulatory Compliance - Seagate STD124000N Product Manual

Chapter 2

Regulatory Compliance

Page 14
These DDS drives comply with the regulations listed in the following table.
Agency
CSA
TUV-RHEINLAND
UL
FCC
CE
1. Required compliance for external model; verification on file for internal models.
Use these drives only in equipment where the combination has been determined to
be suitable by an appropriate certification organization (for example, Underwriters
Laboratories Inc. or the Canadian Standards Association in North America). You
should also consider the following safety points:


Install the drive in an enclosure that limits the user's access to live parts, gives
adequate system stability and provides the necessary grounding for the drive.


Provide the correct voltages (+5 VDC and +12 VDC) based on the regulation
applied—Extra Low Voltage (SEC) for UL and CSA and Safety Extra Low
Voltage for BSI and VDE (if applicable).
Regulation
C22.2, No. 950-M89
EN 60 950
1950
1
Class A and Class B
CE compliance
Specifications
DAT Drives