Temperature Selection; Temperature Conversion - Lincoln 2001 Town Car Owner's Manual

Controls and features
In approximately 3 1 ⁄ minutes or less, the fan speed will start to increase
2
and the airflow location will change to the floor area.
If unusual conditions exist (i.e.-window fogging, etc.), the manual
override controls allow you to select airflow locations and the fan control
allows you to adjust fan speed as necessary.

Temperature selection

The display window indicates the
˚ F
selected temperature, function
(AUTO or one of the override
controls) and manual control of fan
AUTO
speed ( ) if automatic fan
speed is not desired.
To control the temperature, select any temperature between 18°C (65°F)
and 29°C (85°F) by pressing the temperature control.
For continuous maximum cooling,
push the temperature control until
FRONT
16°C (60°F) is shown in the display
window. The EATC will continue
REAR
maximum cooling (disregarding the
displayed temperature) until a
warmer temperature is selected by
pressing the temperature control.
For continuous maximum heating,
push the temperature control until 32°C (90°F) is shown in the display
window. The EATC will continue maximum heating (disregarding the
displayed temperature) until a cooler temperature is selected by pressing
the temperature control.

Temperature conversion

Press MAX A/C and FRONT at
FRONT
the same time (for one second) to
˚ C
switch between Fahrenheit and
REAR
EXT
Celsius.
MAX
EXT OFF AUTO
A/C
If your vehicle has an English/Metric (E/M) control to change your
electronic instrument cluster (if equipped) and the message center
(if equipped) from English to Metric, this control will also change the
temperature display. Refer to Electronic Message Center in the
Instrumentation chapter.
28