•
Check the switch component for conti-
nuity between "Brown/White (1)" and
"Brown/Black (2)" and "Brown/White (1)"
and "Green/Black (3)".
Refer to "SWITCH CHECK" section.
3. Direction indicator lamp relay.
•
Connect the pocket tester (DC 20V) to the
indicator lamp relay.
Tester terminal (+)
Tester terminal (–)
•
Turn the main switch to ON.
•
Check the voltage (12V) on the "Brown"
cable to the indicator lamp relay terminal.
*
1
G
BrW
BrB
3
P
B
BrL
Y GB
2
L
N
R
CORRECT
Brown terminal (1)
Earth
IN COMPLIANCE WITH
SPECIFICATIONS (12V)
SIGNAL SYSTEM
INCORRECT
The direction indicator switch is defective.
Replace.
OUT OF SPECIFICATION
The circuit from the main switch to the lamp re-
lay connector is defective. Repair.
7-59
ELEC