Oil Leakage From Dust Seal; Anomalous Hydraulic Braking - Yamaha TT600R Service Manual

2
19. Insert:
20. Insert an Allen key in the bolt (3) at the bot-
During tightening the bolt ensure that the end
of the damper rod holder is correctly engaged
on the damper cylinder assembly.
21. Fill:

OIL LEAKAGE FROM DUST SEAL

If there is a leakage of oil from between the dust
seal (1) and the inner tube (2) replace the oil seal
(refer to "SEAL AND BUSH REPLACEMENT"
section).

ANOMALOUS HYDRAULIC BRAKING

If the fork shows an anomalous hydraulic braking
effect it is necessary to overhaul the damper cylin-
der assembly.
1
Never tamper with the damper cylinder
assembly! This operation should be done by
authorized personnel. Tampering with the
damper cylinder assembly by non authorized
personnel can compromise the safety of the
front fork. The building firm will not assume
any responsibility for any damages resulting
from such action.
4-56
FRONT FORK
•
Damper cylinder assembly (in the inner
tube)
tom of the outer tube and the special tool (1)
with the holder (2) on the damper cylinder
assembly and screw the bolt completely.
CAUTION:
T-handle (1):
90890-01326
Front fork damper rod holder (2):
90890-01460
Damper cylinder assembly bolt (3):
25 Nm (2.5 kgm)
•
Fork leg oil
Refer to "OIL REPLACEMENT"section.
WARNING
CHAS