Yamaha TT600R Service Manual page 274

16
15
ENGINE ASSEMBLY AND SETTING
NOTE:
Install the friction and clutch plates to the clutch
boss, beginning and ending with a friction plate.
CAUTION:
•
The two friction plates (type A) (15) with
the widest internal diameter should be
assembled in second and last place.
•
The clutch boss spring (16) should be
placed inside the second friction plate.
Quantity
Internal
diameter "D"
NOTE:
Align the mark on the clutch boss (17) with the
arrow (18) on the pressure plate.
3. Adjust:
•
4. Install:
•
•
•
•
•
•
5-72
Friction plate
Type "A"
2
116 mm
Clutch (free play)
See section "CLUTCH ADJUSTMENT" in
CHAPTER 3.
Straight key
Gasket
Crankcase cover (right) (1)
O-Ring
Oil filter
Filter cover (2) (with O-Ring)
See section "Engine oil replacement (with
oil filter change)" in CHAPTER 3.
Bolt (crankcase cover):
10 Nm (1.0 mkg)
ENG
Type "B"
6
113 mm