Yamaha TT600R Service Manual page 107

1
3
REPLACING THE HEADLIGHT BULBS
1
2
7. Install:
•
Headlight bulb (new)
•
Headlight bulb holder (by turning it clock-
wise (b))
CAUTION:
Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of
the bulb, and the bulb life will be adversely
affected. Thoroughly clean off any dirt and
fingerprints on the headlight bulb using a
cloth moistened with alcohol or thinner.
8. Install:
•
Headlight bulb cover
9. Connect:
•
Headlight coupler
10. Install:
•
Upper side of the cowling (onto the meter
bracket)
•
Headlight (adjust the headlight beam if
necessary)
11. Install:
•
Cowling screws
Cowling screws:
10 Nm (1.0 kgm)
Auxiliary light bulb
1. Remove:
•
Cowling screws (1)
2. Remove:
•
Cowling (from the meter bracket)
NOTE:
Remove the cowling from the meter bracket by
lowering it to disengage it, and then lifting it up.
3. Remove:
•
Headlight (2)
•
Auxiliary light socket (3)
NOTE:
Remove the auxiliary light socket (together with
the bulb) without disconnecting the leads.
•
Bulb (by pushing it in and turning it coun-
terclockwise)
3-55
INSP
ADJ