Troubleshooting - ClearSounds CS2000M Owner's Manual

TROUBLesHOOTING

probLem
red power light
is not on
no sound from
headphones
self-testing
of system
sound too low
poor sound
static
possibLe CAUse
- AC Adaptor is not plugged in
- AC plug is not plugged into the transmitter
- The audio cord is not plugged into the audio source
- There is no audio output from the audio source
- The audio cord is not plugged into the audio source
- There is no audio output from the audio source
- The transmitter is not ON
- The headphones are not ON
- The headphones have no batteries
- The batteries are inserted in the headphones incorrectly
- The batteries are dead and need to be replaced
- Hook up the microphone to the transmitter and speak
into the microphone. You should hear your voice in the
headphones and you will confirm the unit is working
- Headphone volume control is too low
- Batteries are weak and need to be replaced
- Infrared sensor on headphone is not in line with the
transmitter
- Batteries are weak and need to be replaced
- Headphone volume control needs to be adjusted
- Infrared sensor on headphones is not in line with the
transmitter
9