Table of Contents
Advertisement
PLACeMeNT OF THe
TRANsMITTeR
8
Turn on the Infrared Transmitter
(A). The infrared light rays are
emitted in a conical shape. For best results,
place your Transmitter above your tele-
vision or any other audio source. The
Transmitter will work best if it is within
33 feet (apx. 10 meters) from the head-
phone receiver (B). There should not be
anything obstructing the transmission of
the infrared light rays to the receiver. See
Diagram 8.
Diagram 8
ACTIvATING THe HeADPHONes
Place two AAA batteries into the battery
compartment in the left earpiece of the
headphone matching positive to positive
and negative to negative. Turn on the head-
phones making sure there is an unobstructed
line of sight between the headphones and
the Transmitter. Adjust the television vol-
ume and the headphone volume to a com-
fortable listening level
MUTING THe
TeLevIsION sOUND
Many televisions have speaker switches
located on the back panel. If your televi-
sion has one and you want to keep the
sound muted, move this switch to the OFF
position and listen to your TV exclusively
through the headphones.
Some televisions have speaker switches
that can only be controlled by the remote
control. If your television falls into this
category, press Menu on the TV remote
and locate SPEAKER on the screen menu.
Switch SPEAKER to the OFF position
and listen to the TV exclusively through
the headphones. To find out if your tele-
vision has this function, refer to your
owner's manual.
Advertisement
Table of Contents
